Chilly reception: why is my car heater not working?
Simple Answers from Protech Auto Service
Share
Tweet
One of the few things that can make a morning commute worse in the winter is if the heat stops working inside your car. Have you ever turned on the fan for it only to blow cold air and wondered, “Why is my car heater not working?” If the answer is yes, then you know the struggle is very real. Not only is it terribly uncomfortable driving in a cold car, but it can actually be dangerous, as you can’t defrost the windshield either. Here are some things that could be causing your heat not to work.
1. Coolant System
Your engine’s cooling system works, in part, by the coolant traveling through a heater core that heats the inside of your car. Basically it’s a small radiator that hot coolant flows through. The fan inside your car then blows heat off of it to give the cabin heat. If your car is running low on coolant, or if there’s air in the system or if the core itself isn’t working properly, then this could be the cause of your car heater not working.
2. Thermostat
Along the same lines as the coolant system issues, a malfunctioning thermostat could also cause your car not to have heat. If the thermostat isn’t opening and allowing coolant to flow, then the core won’t heat up – and there you have it, no heat. Granted, if this is the problem, then you’ll soon notice your car overheating as well, which is without a doubt a much larger problem than not having a cozy, warm car to drive in.
3. Broken or clogged
Heater Controls
Sometimes after using the control buttons for several years, they can get gummed up and stop working. If the coolant levels are fine and there doesn’t seem to be a problem with your heater core, you may need to replace some of the control buttons or your heater control valve. The heater control valve is underneath your hood and acts as the switch that turns the heat on and off. If that piece is not working right, your car could get stuck blowing cool air into the cabin.
4. Blower Fan
If your coolant system is topped off and working fine, and there aren’t any leaks, then it could be as simple as the fan not working. While the core may heat up just fine, without a fan to blow the heat away, your car will never warm up inside. Most fans are audible when on, so if you don’t hear the fan running, then it’s most likely not working. Start by checking to make sure the fuse isn’t blown. If it’s not, you may need to replace the fan, which is located inside the dashboard.
Since there are a few reasons the heat may not be working, it can also be said that there are a few ways you can prevent this with simple maintenance. Obviously, making sure your coolant is full at all times is key, because it will allow the core to heat up. It will also enable your engine to run properly. With that said, it’s important to make sure the thermostat is working properly, too. This is as easy as taking it out of the engine for testing, placing it in some water using a pair of pliers to hold onto it, and watching to see if it opens at the temperature written on it. If it’s working properly, then it may be the fan. Checking the fuse is the best way to see if it’s bad — if it is, you’ll need to have it replaced.
For more information to answer the question, “Why is my car heater not working?” chat with one of the knowledgeable technicians or service advisers at Protech Auto Service. They can be reached at (661) 822-1100 and are located at 410 W. J St., #G, Tehachapi.
